מייבש לחות LUKO Desiccant Dehumidifier FD-D5000K | א.נ.י.א פתרונות אנרגיה

קבלו פרטים נוספים

FacebookYoutubeLinkedin
דף הבית >> קולטי לחות, סופחי לחות >> מייבשי אוויר Luko - Desiccant Dehumidifier >> מייבש לחות LUKO Desiccant Dehumidifier FD-D5000K
 

 

​This series is normally with low regeneration temperature.It is suitable for environment with surplus of heat.And it is usually apply in application that require to achieve low dew point
 ייבשן לחות LUKO Desiccant Dehumidifier FD-D400K
התקנה בתוך המבנה
התקנה מחוץ למבנה
INDOORS INSTALLATION
OUTDOORS INSTALLATION
מפרט טכני 
Manufacturer
Parts and Components Brand
Items
LUKO SPCC MachineMainBody
GOODUSE
GOODUSE
Rotor Belt
LUKO
LUKO’s Custom Made Desiccant Wheel
Desiccant Wheel
LUKO
G7 primary filter / Or Custom Made
Process Air Filter
LUKO 
 
G7 primary filter / Or Custom Made 
Regeneration Air Filter
Schneider
 Schneider
Alarm Indicator Device
Schneider
 Schneider
Indicator Light
Schneider
Schneider
Power-On Button 
Schneider
 Schneider
Power-Off Button
Schneider
 Schneider
Manual / Auto Switch
OMRON
 
 OMRON
Delay Timer
ABB
ABB
Master Switch
Schneider
Schneider
Motor Protection Device 
Schneider
 Schneider
Air Switch
 OMRON
 OMRON
Intermediate Relay
Schneider 
 Schneider
AC Contactor
German Rosenberg 
German Rosenberg
Process Air Fan
Fashida
Fashida
Regeneration Air Fan
LUKO LUKO’s Custom made Heater
GANGYANG HVAC Galvanized Type Duct Flange
*Technical Specifications and dimensions are subject to change without prior notice
BILL OF MATERIALS
TECHNICAL DATAS
לוח בקרה
⇒ High Performance Desiccant Rotor with high moisture adsorption rate for reliable performance and continuous trouble-free operation. Lifespan of the Rotor wheel is 5 – 8 years under normal operating condition (non-corrosive environment and regeneration temperature of below 140°C)
⇒ Come with advance touch control panel with built-in Honeywell Temperature and Humidity Sensor for real-time monitoring, which is easy to operate and user friendly.
⇒ Our desiccant dehumidifier is built-in with dual-speed adjustable centrifugal fan which can be set to run in High and Low speed for the Process Air Fan. It is also come with separate fan for Regeneration Air.
⇒ Simple and elegant design with unique frame for better sealing and insulation structure to reduce heat loss.
⇒ Body material build with SPCC metal and Power-Coated paint for better resistant over corrosion.
⇒ Built with reliable electrical component from well-known reliable brand. e.g. ABB, OMRON, Schneider and others.
⇒ Low operation cost and energy efficient. Our desiccant dehumidifier used PTC and SCR build heating technology with advance processor-controlled regeneration heat, which can save 20% -30% of power consumption.
⇒ Structure built for convenient installation and easy maintenance with replaceable F5 filter and washable rotor. It is also build according Fire Prevention Standard, to ensure safe operation of the machine.
⇒ Inlet and Outlet air of the machine is conformance to duct connection standard of ISO7807 to simplify air duct connection. ⇒ Equipment is conformance to TUV, GS, ROHS and CE Standards.
Capacity(@20°C,60%RH) 35kg/h
Process Air Flow 5000m³/h (400PA)
Reactivation Air Flow 1850m³/h (250PA)
Process air in & out ⌀500mm
Regen. air in & out ⌀250mm
Max. Power 52KW
Rated Power 50KW
Rated Current 57A
Primary Filter G4 efficiency
Heater Type Tube + SCR
Controller Type digital controller + button
Voltage /Frequency 380V/50Hz/3P
Applied Temperature  -20°C~60°C
Body Material Metal Steel with Powder Coated (optional: SUS304 – additional cost)
Weight 520KG
Dimension 1920*960*1340mm

מייבש לחות LUKO Desiccant Dehumidifier FD-D5000K