א.נ.י.א פתרונות אנרגיה - מייבש לחות LUKO Desiccant Dehumidifier FD-D13500K

קבלו פרטים נוספים

FacebookYoutubeLinkedin
דף הבית >> מייבשי אוויר גלגל סופח סילקה ג'ל >> מייבש לחות LUKO Desiccant Dehumidifier FD-D13500K
 

Dehumidifying Capacity: 107.7KG/H

התקנה בתוך המבנה
התקנה מחוץ למבנה
INDOORS INSTALLATION
OUTDOORS INSTALLATION
מפרט טכני 
*Technical Specifications and dimensions are subject to change without prior notice
TECHNICAL DATAS
לוח בקרה
KEY FEATURES

*High Performance Desiccant Rotor with high moisture adsorption rate for reliable performance and continuous trouble-free
operation. Lifespan of the Rotor wheel is 5 – 8 years under normal operating condition (non-corrosive environment and
regeneration temperature of below 140°C)

*High strength,high reliability:
Panels are double-skin with injection of high density polyurethane. The outer skin is anti-corrosion color-
coated steel sheet, the inner skin is galvanized steel sheet.

*Outstanding cold-bridge free structure
The unit cabinet consists of panels attaching to each other by sealing strip, tighten with concealed bolts.The service door (or service pan
el) is plastic-steel frame with polyurethane injection panel and rubber sealing strip.

*Low air leakage rate
Double skin panel, unitary structure design, less connecting joints, multi sealing strips in the contact surfaces, around sealing service
door/ panel, all ensure almost total air can be supplied to the air-conditioned room. The air leakage rate is less than 0.29%.
Unit will not sweat when exterior room temperature is 27°C, relative humidity is 90%.

*State-of-the-art design
The outer skin is colored steel sheet with anti-
corrosion coat and is cleanable; the fastening bolts are concealed by plastic caps. The outer layer of film prevents panels from scratching during unit assembling and transportation. Clear, smooth and color coordination appearance make the outlook
attractive.

*Low noise design
Optimal fan selection, excellent working condition, efficient operation.
Flexible connection at air outlet, minimizes vibration transmission.
Equipped with shock absorbers, decreases vibration, low noise. Tighten cabinet, secure against noise leakage.

*Stable air supply fan assembly
Brand-name centrifugal fan, high performance efficiency,3
phase, class "F" insulation and IP54 protection AC motor.Belt drive, optimal selection of drive ratio, increase fan/motor assembly efficien
cy, easy for maintenance.Service door or service panel is equipped for inspection of motor and fan.

*Equipment is conformance to TUV, GS, ROHS and CE Standards.
Model FD-D13500K
Voltage /Frequency/Phase 380V/50HZ/3P 4-core cable
Rated Power 167.6KW
Operating temperature -20°C~+60°C
Capacity 84.6~107.7KG/H
Process air Volume 13500CMH
Process/reactivation air ratio (L1/L2) 0.33
Rotational speed (rph) 8~18
Face velocity (m/s) 3~4
Rotor material:  high efficiency silical gel rotor
size(diameter*thickness ):  Φ1370*200mm
drive motor:  0.1KW
motor reduction ratio:  1:1200
Supply Air air rate(L1):  13500CMH
fan motor power:  15KW
total air pressure:  2400Pa
Regeneration air air rate(L2):  4360CMH
fan motor power:  5.5KW
total air pressure:  2150Pa
Regeneration heater power:  147KW
heating method:  electric heater
Primary filter filter frame:  aluminum alloy
class:  G4
type:  plate filter
Housing casing frame:  anti cold bridge aluminum alloy
panel:  high density polyurethane foam
external panel:  0.45mm color coating steel
internal panel:  0.7mm galvanized steel plate
base frame:  aluminum alloy,stainless steel
Electricals controller:  programmable PLC humidity and temperature                   controller
displayer: 7" touch screen
air-circuit break:  DELIXI
relay:  Schneider

מייבש לחות LUKO Desiccant Dehumidifier FD-D13500K